PROFESSIONAL WHEEL PLATING SYSTEM
F.O.B.  FACTORY- ONSITE TRAINING AVAILABLE

This is the real thing!
Here is a sure fire way to Triple chrome plate. Samtec offers a complete system for chrome plating steel/aluminum wheels and aluminum die cast motorcycle parts.

• 8 ea. 18”x24”x24”, plating tanks

• 8 ea. 22”x 23”, Rinse tanks

• 1 ea. 18” x 24” x 24 chrome tank liner

• 4 ea. Heaters 3000 watts and controllers

• 3 Pumps/Filters and Agitators

• Complete Operating Instructions

• Tank Wiring

• Copper and stainless steel anodes

• All anodes

• 100 AMP DC power supply

• 1-D.I. wastewater filtration system with piping that meets OSHA requirements for the environment.

• Chemicals for steel, aluminum and pot metal plating
  (35 gallons each)

Samtec's Model 2500 is easy to use and completely portable.  The Model 2500 chrome plater is user friendly and comes with complete instructions, plus an 800 help number.

$2964.50

• 16oz. of bright chrome
• 16oz. of alkaline copper, 16oz. of acid copper
• 32 oz. each of chrome stripper and nickel activator
• Plus all the tools required to professional chrome plate.

CHROME PLATING KIT

Samtec's chrome plating kit provides a show quality nickel, copper & chrome plate on items such as headlights, bezels, bumperettes, nuts & bolts, brackets, etc.  It can be applied to copper, steel and brass.

There are three different processes each with its own tank and chemicals, as well as the electro cleaning and activating tanks.  The chrome plate is always applied over a nickel plate, which will fuse to most metals quite readily.  The copper plating system is used as a hi-build filler to cover blemishes, pits and scratches.  The copper plate can be built up to a thickness of 1/8".  Samtec includes copper for most metals.

Copper plating takes from 10 minutes to several hours depending upon desired thickness required.  Nickel takes for 30-60 minutes and chrome only 4-5 minutes.

The kit will give you approximate 5- square feet per gallon of nickel and copper plating before needing replaced.  Decorative chrome solution will plate approximately 2000 square feet per gallon.

A Samtec 50 amp Power System with precision control and easy operation is available for $595.00 for operation of the chrome kit or you can operate the system with a 12-volt battery.

• 5 ea. 3½ gallon polypropelene tanks
  (10" deep x 14" at the top & 11" at the bottom)

• Copper solution and copper anodes

• Nickel solution and nickel anodes

• Chrome solution and chrome anodes

• Degreaser

• Activator

• Mist suppresser

• 3 tank heaters

• 1 air pump, air line

• 3 bubblers and gang valve

• Instructions

$764.50
Optional 50 amp power system w/fingertip control
$695.00

• 5 ea. 6½ gallon polypropelene tanks
  (17 3/4" deep x 14" at the top & 10 1/2" at the bottom)

• Copper solution and copper anodes

• Nickel solution and nickel anodes

• Chrome solution and chrome anodes

• Degreaser

• Activator

• Mist suppresser

• 3 tank heaters

• 1 air pump, air line

• 3 bubblers and gang valve

• Instructions

Optional 50 amp power system w/fingertip control
$695.00

2 Gallon Kit

• Aluminum cleaners/Activator Act 8 dry
• Cyanide copper strike concentrate
• 3-3 1/2 gallon tanks and lids
• Zincates concentrate
• Copper anodes and stainless steel hooks
• Procedure

$200.00

4 Gallon Kit

ULTRA CHROME SYSTEM

See the Ultra Chrome System in Action!